Paving patio driveway DIY moulds

Call 083 990 0449.  Email sales@diywesterncape.co.za or order on line.

Paving  patio driveway DIY moulds for concrete pathways, patios and driveways. Easy to use and recyclable. Make them any colour for a great outdoor decor feature around your home.

Cover those dry areas and save on water. View our Gallery.

Pathmate moulds are a simple design and easy to use.

Prepare and clean the ground.

Place the mould on the ground.

Premix the concrete/cement and fill the mould.

Smooth the concrete/cement in the mould.

After about 5 minutes, carefully remove mould

Smooth the edges and fill the gaps.


R370.00 each

R470.00 each

R440.00 each

R500.00 each

R500.00 each

The Butterfly mould is a container style simple design and easy to use.
Prepare and clean the ground.
Spray the mould with silicon to prevent sticking.
Premix the concrete/cement and fill the mould.
Smooth the concrete/cement in the mould.
After about 48 Hours, carefully remove mould from cement.
Place the mould on the ground.
Casting:
Spray the mould with silicon to prevent sticking.
Mixing the concrete:  Mix proportions are: 1 cement x 1 concrete sand x 1 stone, enough water to make the concrete sluggishly pourable. For small castings use: 1 cement x 2 coarse concrete sand, enough water to make the concrete sluggishly pourable. The biggest particles in the concrete should not be more than a quarter of the width of the narrowest part of the casting. In hot weather, keep the cement, sand and stone in the shade and use chilled water for mixing the concrete so that the working time is not reduced by earlier setting of the cement. Mix the concrete thoroughly in plastic dish using a spade.
Demoulding:
The mould can be removed from the casting usually between 24 and 48 hours after casting. Take care to handle the mould in such a way that the casting and mould are not damaged. The mould should be cleaned as soon as it is removed from the casting and stored where it will not be damaged

Paving  patio  driveway DIY moulds. Order now and collect in Parklands, Cape Town.

Cement and Mould Information