Double Cobblestone Mould 105x210x50mm

R140.00

Container style mould:  paver

Cobble stone – slate finish

Paver Size: 105mm x 210mm x 50mm

Mould Castings per m²: 16

6 moulds  =  m² (48 bricks)

3 Cavity

Volumetric weight: 0.23kg

Shipping: Paving Moulds are shipped separately from the DIY Paving Moulds with separate shipping costs when bought together on the same order.

Availability: In stock

Double Cobblestone Mould 105x210x50mm

The double cobblestone mould 105x210x50mm will produce 3 double cobbles, 16 moulds are required to manufacture 1m2 (48 bricks) Perfect for driveways, paving and landscaping.

Pavers produced are 50mm thick.

Slate finish.

Castings per m²: 16.

Made from a Virgin Polypropylene and will last for years if properly cared for, they are engineered to be strong and sturdy enough to hold their form and flexible enough to allow for easy de-moulding.

General instructions for the double cobblestone mould 105x210x50mm

Mix the Concrete by hand or with a Concrete Mixer. Alternatively purchase bags of pre-mix and simply add water!

Release Agent

Requires a release agent to be used in the mould before adding cement.

Mix 1 part mould release oil to 4 parts of water and mix vigorously. Apply the mould release oil inside and outside of the mould with a sponge. This makes for easy cleaning.  Oil your moulds  over a bucket or tray to catch all of the excess mould release oil.  Reuse the excess oil.

Aggregate

It is important to source quality local aggregates. Keep your costs low. The best option: Visit your nearest builders supply store and ask for assistance. Alternatively try and find a local crusher plant in your area.

Cement Oxide

Cement oxide can be used to colour the cement in various colours as required and can be purchased from your local hardware. The coloring of your products will take a bit of experimenting to get your personal preference right. Use between 3-10% of oxide to the cement volume in your mix.

Curing for the double cobblestone mould 105x210x50mm

Always place your product on a flat, level surface to cure . If you do not have a paved/concrete surface, put down river sand and level out the moulds by working them into the sand.

Please read our instructions.

De – Moulding for the double cobblestone mould 105x210x50mm

Always de-mould by flipping the mould upside down.  Your paver will pop out. Work carefully with the products. Remember that your concrete has not yet reached its maximum strength and it will continue to get stronger every day. Approximately 28 days it will reach 90% of its maximum strength. Always Pack your pavers onto a wooden pallet or on the ground.

Do not stacking pavers more than 4 bricks high. To gain more strength, wrap your bricks in pallet wrap, however this is not necessary. This will retain the moisture and allow your pavers to gain strength faster.

Advice

Never take shortcuts on your manufacturing process or ‘skimp’ on aggregates. Take pride in what you are manufacturing. Make sure that you are using the correct aggregates.  Always use the correct cement and cement/sand ratios. If you manufacture high quality products you will be able to charge premium price and have returning customers.

Refer to our manual for a more comprehensive instructions.

 

Weight 1 kg
Dimensions 11 × 22 × 6 cm

Reviews

There are no reviews yet.

Be the first to review “Double Cobblestone Mould 105x210x50mm”

Your email address will not be published. Required fields are marked *