Sale!

DIY Paving Mould Y-Stone

R330.00

Name: Pathmate Paving mould

Shape: Y Stone

Dimensions:  37 x 37 x 4.5 cm

Weight: 0.410 Kg

Volumetric weight in box: 1.23kg

Colour: Black

Material: Hard plastic

Shipping: DIY Paving Moulds are shipped separately from the Container Moulds with separate shipping costs when bought together on the same order.

Availability: In stock

DIY Paving Mould Y-Stone

Create unique pathways, patios and driveways with the DIY paving mould Y-Stone.

Size: 37 x 37 x 4.5cm

Use as a wall décor, pathway, patio or driveway or any unique design created by you.

The paving moulds are made from Virgin Polypropylene and will last for years if properly cared for, they are engineered to be strong and sturdy.

Reusable, recyclable and comes in various sizes and shapes. Black in colour.

Simple design and easy to use.

  1. Prepare and clean the ground.
  2. Place the mould on the ground.
  3. Premix the concrete/cement and fill the mould.
  4. Smooth the concrete/cement in the mould.
  5. After about 5 minutes, carefully remove mould

General Instructions for the DIY Paving Mould Y-Stone:

Mix the Concrete by hand or with a Concrete Mixer. Alternatively purchase bags of pre-mix and simply add water!

Release Agent

No release agent is required.

Cement Oxide

Cement oxide can be used to colour the cement in various colours as required and can be purchased from your local hardware. The coloring of your products will take a bit of experimenting to get your personal preference right. Use between 3-10% of oxide to the cement volume in your mix.

Care Instructions after every use:

Clean the mould with water.

Wipe down the mould.

Store in a safe place.

Cement

Recommended Medium-strength concrete 25 MPa

Suitable for reinforced foundations and slabs, light-duty house floors, paths, patios, steps, driveways and garage floors. 1 part AfriSam All Purpose Cement + 21/2 parts coarse sand + 21/2 parts stone. To make a mix for 1 cubic metre of medium-strength concrete you will need: 7,7 bags AfriSam All Purpose Cement + 0,63 cubic metres of coarse sand + 0,63 cubic metres stone. Allow an additional 10% of required quantities for wastage.

Driveway preparation for the DIY Paving Mould Y-Stone

Please read the – INSTALLATION DETAILS FOR STANDARD BLOCK PAVING on the DIY Paving mould Information page

Please visit our Products page for more mould, cement and preparation information.

Weight 2.000 kg
Dimensions 37 × 37 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “DIY Paving Mould Y-Stone”

Your email address will not be published. Required fields are marked *